ColorSource AV

ETC (consoles)

3.4.0.392026-04-30

changelog

Adds support for 16-bit Intensity and ColorMix parameters; bug fixes including AV40 external monitor lag after hibernate, CCT values fix, undo patch issues

steps

what you'll need: FAT-formatted USB drive via Setup > Files > Advanced > Update Firmware

1Download 'ColorSource Console Software v3.4.0.39' from https://www.etcconnect.com/Products/Consoles/ColorSource/Software.aspx

2Unzip the downloaded file

3Transfer the extracted file to the root directory of a FAT-formatted USB memory stick

4Insert the USB memory stick into the USB port on the ColorSource AV console

5On the console, press Setup > Files > Advanced > Update Firmware

6Press Yes to proceed with the update (press No to abort)

7Wait for the update to complete, do NOT power off the console during this process

8When prompted, shut down and restart the console

GotchaUSB drive must be FAT (not FAT32 or exFAT), ETC specifies FAT formatted

GotchaIf updating FROM v1.0.0, the firmware file must be named 'colorsource.fw' for the console to recognize it

WarningDo not shut down the console during the update process, wait for the completion prompt

GotchaAV20 and AV40 both covered by v3.4.0.39, same installer file for all four ColorSource console variants

GotchaFixture personalities built with Personality Editor v3.2.0 or later cannot be loaded on consoles running pre-3.2.0 software